You could also do a filament change on this one if you wanted to. I just use a marker to color the top surface black to look like a lid. Be careful when removing supports as the tubes can easily snap.Īir Cleaner: print ride side up. Supports: none (the roll cage will be a bit stringy, but it's too thin to use supports)īumper: print upside down (ends of 'tubes' against build plate). I modified my g-code for a color change at the point the roll cage starts printing. Hot melt glue works well for gluing all the parts together.īody: Print upside down (large flat area against the build plate) The chassis and the body seems to be durable enough to last quite a long time. I print everything in PLA and it works well. Find the smallest tires you can for a good fit (I used Super Tires 1400 on the rear and QuickSlicks CB07on the front). The printed wheels are okay, but nowhere near as nice as a set of aluminum ones. On the rear I chose to use 15x8 wheels modeled after hubless CB Design wheels, and on the front I am using 14圆. The chassis uses a standard FC-130 motor (scalextric can motor) and 3/32 double flange axle bushings. I designed the parts with Autodesk Inventor and Fusion 360 using my above 'thing' as a starting point. Dirt late model body and chassis for 1/43 slot car racing.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |